Arborists Can Help Their Communities Prepare for Wildfires

By Michael S. Beaudoin 
Community Forestry Program Manager 

Wildfire in forest.

Before returning to Idaho to serve as the UCF program manager, I managed wildfire mitigation programs throughout California and Nevada. This background in wildland fire often informs how I provide technical assistance to our communities. The 2021 fire season in Idaho is shaping up to be a problematic one for our high-risk communities.

The relatively dry winter throughout the state resulted in record-low moisture levels in our forests and rangelands. Many of our communities are intermixed with this dry wildland and the urban canopy often abuts or is mixed with the wildland-urban interface (WUI).

The recent warmer weather is not helping matters either. The National Inter-Agency Fire Center (NIFC) in Boise predicts that our summer months will most likely be warmer and drier than typical for Idaho. More info on NIFC’s weather predictive services can be found here.

Although the 2021 fire season predictions look bleak, Arborists have many tools at their disposal to help their communities prepare for wildfires. Examining your city’s open space, golf courses, or multi-use trails for flammable untreated vegetation is a good place to start. 90% of fires start due to human-caused ignitions and municipal open space areas are often prime ignition sources. Inviting wildfire mitigation specialists to review your community forestry plan and identify priority treatment projects will help your community better prepare for potential ignitions.

photo of a home and defensible space
Mature trees that were planted within 30 feet of your home can be pruned to separate the available fuel from your home.

Private arboriculture companies can also help prepare their communities for wildfire by assisting their clients with home-hardening services. Proper maintenance and irrigation of landscape trees are shrubs is crucial piece of wildfire mitigation. No tree or ornamental plant is completely fire-resistant especially when neglected by the home-owner. Some services our private contractors can provide include:

  • Crown pruning tree branches at least 30 feet away from the home.
  • Remove tree species that are highly flammable like Arborvitae.
  • Remove leaf litter or debris from the roof and gutters of the client’s home.
  • Install home hardening features such as ember-resistant vents

The University of Idaho and several other state extension services provide a lot of information on preparing your tree canopy for wildfires. Some helpful resources include:

Your home and the trees that surround it are most likely the biggest financial investment of your lifetime. Have you prepared to protect those investments? If you have questions regarding how Arborists can help their communities prepare better for wildfires assistance, please reach out to us at CommunityTrees@idl.idaho.gov

Consider Allergies Before You Plant

Urban Forestry in Sandpoint. Picture of a tree lined street,

Approximately 50 million people suffer from seasonal allergies each year and approximately $18 billion is spent each year on addressing allergies (CDC 2018). All tree species produce pollen, but some produce much more than others. Trees that are wind-pollinated, like conifers, produce much more pollen than insect pollinated trees, like tulip trees (Liriodendron).

Much of our issues with allergies in our cities comes down to our tree selection and planting location. The recent trend of selecting male trees to avoid fruits falling on sidewalks has resulted in the planting of heavy pollen producing male trees.

Thomas Leo Ogren developed the Ogren Plant Allergy Scale (OPALS) in 2000 to classify trees by their pollen, contact, and odor allergy levels. When you plant, consider planting female trees or trees with a low pollen rating on the OPALS pollen rating scale.

Some tips on selecting allergy-friendly trees:  

  1. Select Trees that with a OPALS rating of 5 or less (female red maples, female ash)
  2. Plant female-bearing plants to reduce the amount of pollen (Avoid female ginkgoes)
  3. Restrict outdoor activity during days that are windy with low humidity
  4. Shower after working outdoors to remove pollen from skin and hair.

For more resources on allergy sensitive trees please read this publication from the University of Florida here or the University of Nevada-Reno here

Winter Tree Care, Protection and Identification

By Gerry Bates
IDL Southern Idaho Community Forestry Assistant

picture of a tree in winter

Short days and long, cold nights are sure signs that the trees you care for are dormant. Winter’s bare branches offer an opportunity to inspect your trees and evaluate whether they present a hazard or require maintenance. When a tree branch lands on people or property, it can mean trouble.

In evaluating the hazard potential of a tree, identify potential targets and defects. Targets are objects or property that would be hit if the tree or limb falls. Common targets are houses, cars, and utility lines. It is especially critical to consider areas where people gather, such as pools, picnic tables, and decks.

A defect is the condition that may cause the tree to fall or lose branches.  If a defect is suspected, a hazard tree evaluation should be undertaken by a trained professional Arborist or urban forestry consultant. 

defective tree photo
Codominant branches and included bark indicate a weak branch attachment and are a defect that can lead to limb failure. Image Credit: University of Nebraska-Lincoln.

If a defect is suspected, a hazard tree evaluation should be undertaken by a trained professional Arborist or urban forestry consultant.  Every tree has the potential to fail, but while only a few do each year, it’s important for property owners to regularly check their trees for defects.  Trees most likely to become hazards are those weakened by age, storms, fires, or other injuries. If such trees are planted near pedestrian or vehicular traffic or buildings, they can jeopardize safety. 

Look in the crown of the tree for signs of low vigor, dead branches, wounds, or cracks.  Fungus, mushrooms, or conks on or at the base of the trunk or large limbs indicate decay inside the tree.  If a tree begins to suddenly lean, or if the ground around the tree starts to rise up, there is a strong likelihood that the tree is going to fall.

If the hazard is not imminent, consider moving the target. Although you can’t move buildings, sometimes a landscape feature, parking site, playground equipment, or picnic table can be moved out of the danger zone. Remove defective branches and reduce the weight of large branches. Sometimes the best solution for very hazardous trees is removal.

photo of wood rot on a tree trunk
Fruiting bodies from fungi indicates wood rot and is a defect that can lead to root loss and whole tree failure. Image Credit: Oregon State University-Alan Kanaskie

Dormant trees are still susceptible to injury or death. The most obvious danger is injury resulting from low temperatures.  Trees that aren’t hardy enough to grow in the area are likely to suffer such injury. But the sudden onset of extremely cold temperatures after relatively warm weather in the winter can cause injury to otherwise hardy trees.

To avoid this kind of injury, select cultivars of trees and shrubs that are hardy in your city. Avoid stimulating new growth that won’t have time to harden off before winter. That means don’t fertilize trees after June 30, and avoid late summer pruning. Irrigate your trees until the ground freezes. Trees and shrubs withstand severe temperatures better if soil moisture is adequate. Mulch root zones with a thick layer of wood chips, sawdust, leaves, or straw to retain moisture in and moderate the temperature of the soil.

Sunscald, or southwest damage, is a problem of thin-barked trees such as maple, ash, crabapple, Mountain ash, and fruit trees–especially if they are newly transplanted. Winter sunscald occurs when the bark on the south and west sides warms during the day and then freezes at night. Sunscald can be prevented by reflecting the heat of the sun. Trunks can be painted with white latex paint or wrapped with burlap or commercial white wrapping. Use the wrap for at least the first two winters on new trees, but be sure to remove it each spring, as it provides an excellent place for insects to live.

image of sunscald on a pine tree
Sunscald or southwest damage can be an issue in thin-barked trees. Image Source: Utah State University

Snow breakage can be a problem, especially in evergreen trees and shrubs.  When snow is allowed to accumulate on spreading or upright branches, the increased weight can easily break whole sections out of a tree.  Remove snow from branches before it accumulates.  While winter can be tough on our trees, especially newly planted ones, a little forethought and care can assure long term success.

During snowy winters, animals cause quite a bit of damage.  Deer, porcupine, rabbits, and mice can girdle trees by gnawing on the bark.  Wire can be used around the trunk to protect it from larger animals; tinfoil helps deter smaller animals from chewing on the bark.

broken tree caused by snow

The identification of trees in the non-leaf seasons is fun and easy. A twig is a young shoot representing the current season’s growth of a woody plant. To successfully identify plants by their twigs, familiarize yourself with the individual parts of a stem. The terms lateral or terminal bud, leaf scar, stipules, node, spur shoot, and pith need to be understood. Individual species of trees all have different and specific arrangements of these parts. That particular arrangement is the key to identifying the plant.

Fortunately, help is just a “mouse click” away. Many sites on the internet can lead you step by step through the process of correctly identifying a plant. A search using the words “Dendrology Key” will yield sites devoted to plant identification. One method of plant identification, dichotomy, asks pairs of questions. The answer leads to two more choices and so on, until by the process of elimination, the plant is correctly identified.

Bark is another feature that helps in winter tree identification. While it may not be possible to distinguish between individual types of maples, it is possible to determine if the tree is an oak, a birch, or a chestnut–just by its bark. Normally, it’s best to examine mature trees when attempting to identify a tree by its bark. Young trees have not yet formed the corky material characteristic in most barks.  Some bark is paper thin (birch); other trees have thicker bark (oak). It can be deeply furrowed (sweet gum), lined with thorns (Honeylocust), scaled (Scotch Pine), or peeling (Juniper).  An excellent reference for identification of trees by their bark is “Tree Bark” by Hugues Vaucher.